While your brake pads may not be something you think about often, they should always be in good shape especially if you’re looking to achieve optimum braking performance. Luckily, there are many ways you can determine when your car need new brakes.
First and foremost, check for damage by looking at your brake pads through the voids present between the wheel’s spokes. Ideally, there should be at least 1/4 inch of pad. You should get your brake pads checked or inspected if you see less than ¼ inch of pad.
Have you ever noticed a high-pitched squealing sound when you press your brake pedal? That’s basically a tiny metal shim that acts as an indicator and gives you a signal that the replacement of your brakes is due. Make sure to pay attention to this sound and get in touch with your mechanic as soon as possible.
The only exception is if your vehicle has been standing after being exposed to heavy rain or car washing, the moisture can form a thin layer of rust on rotors and that too produce a screeching sound when you first apply brake pedals. However, when the rust removed, the squealing sound eventually disappear.
Below you will find some of the most brake problems. Make sure to visit your repair shop if you experience any of these issues.
If you notice reduced responsiveness or if you see the pedal descending towards the floor, this could be warning sign that there’s leakage in the braking system. Also, there could be possibility of brake fluid leak or could be the leak in the brake hose. According to FrontechChina – Brake Pads manufacturer and Supplier, one significant sign of a brake fluid leak is the presence of fluid leakage when your car is parked. Noticeably, the fluid looks same as motor oil except for the fact that it’s less viscous in nature.
Pulling is another important indication that warns you to replace your brakes. If your car drags to one side while braking, it shows that the brake linings are unevenly damaged or that there is some external material in the fluid. In that case, you should get your brakes checked for adjustment of fluid leakage.
The noticeable loud metallic sound is an indication that you have worn down your brake pads completely. The growling sound is primarily caused by the rubbing of the disc and the caliper. If this situation occurs, you might need to get the surface of your rotors repaired or replaced.
A consistent pulsating sound is also a sign of warped rotors that is usually caused by heavy braking that leads to heat up.
In conclusion, for many drivers, looking after and maintaining the brakes is something often neglected! But, keeping your brakes in good shape and properly calibrated can prevent hefty repair costs down the road. Also, it helps you avoid a collision or trouble while driving.